Preparing the buckle for casting

No Comments

The plastic that the buckle is made from is very absorbent so I cant just make a mold straight away, it has to be sealed first which means.... lots of spraypainting. Its had about 8 layers of primer and has been sanded after each layer with 320 grit sandpaper, the front now looks like its been molded in clay rather than the original "plastic dust blasted with a laser" look from before.

Next step is to let the paint cure and make a mold, luckily the Silicone has arrived so I can get started on that soon :D

Be the first to write a comment!